...
Skip to content
info@lcblight.com  ·  +44 7716 620781Commercial lighting · OEM/ODM · Project support
LED Track Lighting · LC-H010 Series

Supermarket Shelf Modular LED Linear Track Spotlight

A linear track-mounted light for supermarket shelves and retail bays. The reference specification lists three lengths and powers with 15° / 24° / 36° beam choices; confirm the rail adapter and model-specific photometry for the actual aisle.

Three published lengthsDirectional shelf lighting15° / 24° / 36° listed beams
Supermarket Shelf Modular LED Linear Track Spotlight product view
LC-H010 Series · Product configurationLinear optical module · track installation
Retail shelf lighting

Match the lit area to the shelf layout.

A linear track module can put directional light along a retail run while preserving the flexibility of track mounting. Fixture spacing, aiming and beam choice should be based on aisle geometry and the required vertical illuminance on products.

01 / Lengths

Three listed body lengths

The reference specification lists nominal lengths of 306 mm, 606 mm and 1205 mm. Confirm the current mechanical drawing and adapter dimensions before layout.

02 / Optics

Choose the listed beam

15°, 24° and 36° options are published. Request current photometry for the exact power and beam to check light on upper and lower shelves.

03 / Track system

Verify the rail adapter

Do not assume compatibility from a generic track description. Send the actual rail profile and electrical requirements before sample approval.

Alternative view of the modular linear LED track spotlight
Product construction of the product
Before a store roll-out

Test a real bay, not only a data sheet.

A sample installation can reveal shelf shadows, packaging reflections and rail fit that are hard to judge from a catalog photo. Review aiming with the intended shelving height and product arrangement.

  • Send aisle width, shelf height, rail position and target display zones.
  • Confirm adapter, driver and control compatibility for the installation market.
  • Approve the selected length, beam and finish on a sample bay.
3Published model lengths
3Published beam options
Technical data

Compare the published LC-H010 variants.

These figures are transcribed from the reference specification. Check tolerances and the latest test report for the quoted model.

ModelNominal powerListed lengthListed beamsPublished outputPublished CRI
LC-H0101212W306 mm15° / 24° / 36°900 lm ±10%Ra >80 / 90
LC-H0102020W606 mm15° / 24° / 36°1,500 lm ±10%Ra >80 / 90
LC-H0104040W1205 mm15° / 24° / 36°3,000 lm ±10%Ra >80 / 90

Source: previous LC-H010 page. Lumen output, CRI, CCT, driver options and adapter compatibility need confirmation on the current approved datasheet and sample.

Reference inputAC 220–240V · 50/60Hz
Reference CCT3000K / 4000K / 6000K
MountingTrack; adapter to confirm
ControlsConfirm for quoted driver
Applications

Build light around the merchandise.

Use the range as a starting point for grocery aisles, shelf bays and retail wall displays. Check beam spread and vertical light level against actual shelf depth and packaging reflectance.

  • Supermarket and grocery shelves
  • Convenience-store display bays
  • Retail wall merchandising and promotional zones
Concept visualization of modular linear track lights above retail shelves
Concept visualization. Product appearance may vary by configuration.
Product FAQ

Questions before specifying?

We can confirm the exact options, compatibility and photometric data for your project configuration.

Which LC-H010 lengths are listed?

The reference specification lists 306 mm, 606 mm and 1205 mm nominal versions. Request a current dimensioned drawing for the exact variant.

How should I select the beam angle?

The reference specification lists 15°, 24° and 36°. Selection depends on rail position, shelf height and target surface; use the current IES or LDT file and a sample bay.

Will it fit our existing track rail?

Compatibility cannot be guaranteed from the reference specification alone. Share the rail profile, wiring and market requirements so the adapter can be checked.

Can it be dimmed or customized?

The reference specification mentions optional controls and OEM work. Confirm the exact driver, control protocol, finish and order quantity in a model-specific quotation.

Ready to review LC-H010 Series for your project?

Send your application, installation details, target quantity and preferred output. We’ll help confirm the most suitable sample and next step.

PROJECT INQUIRY

Tell us about your project

Ask for a sample, technical details or pricing for Supermarket Shelf Modular LED Linear Track Spotlight.

We’ll use your details only to respond to this inquiry. * Required fields

Prefer email? info@lcblight.com