Round, square or twin grille
Choose a frame and light-engine combination approved for the project. Do not assume components can be interchanged in the field.
Commercial LED Downlights · Modular Twin-Head Family
Twin-Head Adjustable Recessed LED Downlight
A recessed modular COB spotlight family with round, square and twin-head grille concepts. Power, cut-out, optic and driver are selected as a complete configuration; reference family options require model-specific confirmation before an order.
Modular Twin-Head Family · Product configurationModular COB grille spotlight
Flexible accent layouts
Aim two focal points from a coordinated frame.
A twin-head arrangement can serve adjacent objects or a wider feature without mixing unrelated ceiling styles. The exact frame, light engines, cut-out and driver should be selected together from current drawings.
Published rotation and tilt
The reference table states 360° rotation and ±30° tilt. Verify the range on the actual frame and head assembly.
Check room-specific comfort
Glare performance depends on the optic and room. Request model-specific photometry and assess the intended space rather than relying on a universal UGR claim.
Modular family imagery of the product
Make the model specific
Resolve the frame, opening and power.
Before ceiling work, obtain a complete twin-head drawing and quotation identifying the frame, power per head, total fixture input, driver and opening.
- Choose frame type, head count, finish and installation opening.
- Confirm whether the listed wattage applies per head or per fixture.
- Request current aiming drawing, photometry, driver and glare calculation.
3Published power figures
3Listed beam angles
Technical data
Build the twin-head configuration.
The values below describe family-level possibilities, not a matched orderable SKU. The approved quotation and drawing define the complete fitting.
| Family | Power | Ceiling opening | Beam options | Frame options | Aiming |
|---|---|---|---|---|---|
| Modular recessed family | Confirm total fixture input | Confirm complete-frame drawing | 15° / 24° / 36° reference | Round / Square / Twin grille | Confirm on sample |
For twin-head orders, confirm whether a wattage is per head or for the complete fixture. The approved SKU, cut-out drawing and test report take precedence over family-level options.
InstallationRecessed; drawing required
Housing describedDie-cast aluminum
CCT optionsConfirm for selected configuration
ControlsConfirm selected driver
Product details
Review the frame options.
Existing product media shows modular variations; approve the exact ordered configuration.
Applications
Two aimed accents in one ceiling zone.
Consider this family for retail, galleries and hospitality feature areas once the complete twin-head drawing and lighting calculation have been reviewed.
- Retail display features
- Gallery and museum accents
- Hotel and reception focal areas
Concept visualization — product configuration shown for illustration.
Product FAQ
Questions before specifying?
We can confirm the exact options, compatibility and photometric data for your project configuration.
What is the exact twin-head model code?
The approved quotation and drawing should identify the frame, heads, driver and finish as one complete SKU.
Is the quoted wattage per head or per fixture?
The quotation and model-specific datasheet should explicitly state power per head and total rated and measured fixture input.
Does the light achieve UGR <16?
A universal UGR figure cannot be guaranteed. Request current photometry for the chosen optic and calculate glare for the intended room.
Can the frame or light engine be swapped after installation?
Confirm approved component interchangeability and service instructions for the exact model before assuming field replacement.
Ready to review Modular Twin-Head Family for your project?
Send your application, installation details, target quantity and preferred output. We’ll help confirm the most suitable sample and next step.