Two adjustable light banks
The reference specification describes independently angled heads, but does not tie an exact aiming range to each model. Confirm mechanical movement and locking on a sample.
A two-bank linear SMD track light for retail shelf and aisle displays. the reference table lists three lengths, 2 × 12W to 2 × 40W power notation and 24° / 36° beams. Confirm the aiming range, adapter and actual total input power for each model.
A dual-head linear format can serve opposing shelf faces or separate display zones from one track position. Set the aiming and beam on a sample bay, because rail height and shelf depth change the final result.
The reference specification describes independently angled heads, but does not tie an exact aiming range to each model. Confirm mechanical movement and locking on a sample.
306 mm, 606 mm and 1209 mm versions appear in the model table. Check the current drawing for overall dimensions including the adapter.
A separate introduction mentions 15° as well. Treat that as unconfirmed until current availability and photometry are supplied.
When a fixture lights two directions, test how each head reaches its target and whether the shared track position creates glare from either aisle side.
The model-specific lengths, powers and beams below are reference configurations. Confirm the chosen version against the current drawing and test report.
| Model | Power notation | Listed length | Table-listed beams | Published output | Published CRI |
|---|---|---|---|---|---|
| LC-H02212 | 2 × 12W | 306 mm | 24° / 36° | 1,800 lm ±10% | Ra >80 / 90 |
| LC-H02220 | 2 × 20W | 606 mm | 24° / 36° | 3,000 lm ±10% | Ra >80 / 90 |
| LC-H02240 | 2 × 40W | 1209 mm | 24° / 36° | 6,000 lm ±10% | Ra >80 / 90 |
The reference model table lists 24° and 36° beams. Other optical options may be reviewed by project; confirm actual input power, photometry and mechanical details in the approved datasheet.
Use the family as a candidate for supermarkets, convenience stores and retail bays after checking the actual shelf illumination and glare on site.

We can confirm the exact options, compatibility and photometric data for your project configuration.
The reference specification describes two independently angled heads, but the exact range is not model-specific. Check the current mechanical drawing and a sample.
The model table lists 24° and 36°. A separate introduction mentions 15°, so verify that option before specifying it.
The reference table uses 2 × 12W, 2 × 20W and 2 × 40W notation. Confirm total measured input power and driver configuration on the current datasheet.
Compatibility depends on the chosen adapter and driver. Send the rail profile and control protocol for verification.
Send your application, installation details, target quantity and preferred output. We’ll help confirm the most suitable sample and next step.